-
Description
HydroTap Cube Plus for Home
Step into the future of kitchen innovation with the HydroTap Cube Plus – a modern marvel that seamlessly blends form and function. Embrace a contemporary twist on the traditional tap design with its sleek, squared-off silhouette with softened rounded corners, adding a touch of sophistication to any kitchen or wet bar space.
The HydroTap Cube Plus isn’t just about aesthetics – it’s about transforming the way you experience water in your home. With its advanced technology, this multi-function tap delivers filtered boiling, chilled, and sparkling water at the touch of a button, revolutionizing your hydration and culinary endeavors.
Transform your kitchen. Elevate your lifestyle. Choose the HydroTap Cube Plus.
Tap:
-
Style: HydroTap Cube Plus BCS – includes child safety lock
-
Hole Size: 1 ⅜”
-
Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel & Gunmetal
-
Installation: Over sink as a secondary tap or on optional drain font/drip tray
-
Flow Rate Max: Max 1.8 gpm / 6.81 lpm
-
Sparkling Water Flow Rate: 0.4 gpm / 1.51 lpm
Command Center:
-
Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
-
Water Connection: ½” BSP – isolation valve is required within 3’ (0.9m) of the installation
-
Integral Water Valves: All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
-
Water Supply Requirements: Potable drinking water supply
-
Optimal Range of Total Dissolved Solids (TDS): TDS Min 50ppm – Max 150ppm
-
Integral Water Filter: 0.2 micron, 1 size – Replace every 1,100 gallons or 12 months
-
Power Rating: 1 x 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
-
Dimensions (WxDxH): 13.3” x 18.2” x 13.1” / 339mm x 462mm x 333mm
-
Minimum Air Gap: Clearances are required – 2″ Left side , 2″ Right side , 8″ above
-
Dry Weight: 75lbs / 34kg
-
Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B438.1, ASSE 1023, ASSE 1087; cUL; CEC
-
Warranty: 3 years
-
CO2 Cylinder: 2 x 1.5lb Beverage Grade Carbon Dioxide Cylinder
-
CO2 Capacity: Approximately 950 8oz cups per 2 cylinders
-
CO2 Operating Pressure: Min 39psi – Max 43psi
-
-
Specifications
- Downloads
- Videos
HydroTap Cube Plus for Home
Step into the future of kitchen innovation with the HydroTap Cube Plus – a modern marvel that seamlessly blends form and function. Embrace a contemporary twist on the traditional tap design with its sleek, squared-off silhouette with softened rounded corners, adding a touch of sophistication to any kitchen or wet bar space.
The HydroTap Cube Plus isn’t just about aesthetics – it’s about transforming the way you experience water in your home. With its advanced technology, this multi-function tap delivers filtered boiling, chilled, and sparkling water at the touch of a button, revolutionizing your hydration and culinary endeavors.
Transform your kitchen. Elevate your lifestyle. Choose the HydroTap Cube Plus.
Tap:
-
Style: HydroTap Cube Plus BCS – includes child safety lock
-
Hole Size: 1 ⅜”
-
Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel & Gunmetal
-
Installation: Over sink as a secondary tap or on optional drain font/drip tray
-
Flow Rate Max: Max 1.8 gpm / 6.81 lpm
-
Sparkling Water Flow Rate: 0.4 gpm / 1.51 lpm
Command Center:
-
Water Pressure: Min 37psi – Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
-
Water Connection: ½” BSP – isolation valve is required within 3’ (0.9m) of the installation
-
Integral Water Valves: All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
-
Water Supply Requirements: Potable drinking water supply
-
Optimal Range of Total Dissolved Solids (TDS): TDS Min 50ppm – Max 150ppm
-
Integral Water Filter: 0.2 micron, 1 size – Replace every 1,100 gallons or 12 months
-
Power Rating: 1 x 110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
-
Dimensions (WxDxH): 13.3” x 18.2” x 13.1” / 339mm x 462mm x 333mm
-
Minimum Air Gap: Clearances are required – 2″ Left side , 2″ Right side , 8″ above
-
Dry Weight: 75lbs / 34kg
-
Product Approvals: IAPMO – NSF/ANSI 372, 42, 53, CSA B438.1, ASSE 1023, ASSE 1087; cUL; CEC
-
Warranty: 3 years
-
CO2 Cylinder: 2 x 1.5lb Beverage Grade Carbon Dioxide Cylinder
-
CO2 Capacity: Approximately 950 8oz cups per 2 cylinders
-
CO2 Operating Pressure: Min 39psi – Max 43psi