-
Description
Bedrock Ventless
Operated with an SIT Proflame II control system including convenient flame modulation on a sleek hand held remote. The Ventless Bedrock Burner is also the LARGEST ventless Drop-in burner system at 60″ featuring IC controlled LED lighting that operates with a remote or easy to use app. Available in 4 convenient sizes, install indoors or under a covered patio & add 1/2″ reflective glass to finish off.
-
Sizing: 24″ – 60″
-
Install in Masonry Trough or Open Face Wood Burning Fireplaces or Certified Ventless Fireplace
-
Install Indoors or Under Outdoor Covered Patio
-
110v System with Plug or Hard Wire Ready
-
Gas Specific, Non-Field Convertible
-
Duly List for Vented and Ventless Installations
-
5 Flame Height Adjustments
-
Integrated LED Lights w/App Controls
-
Designed with 1/2″ Reflective Fireglass
-
-
Specifications
Models
VFLDB-36L-EN or VFLDB-36L-EP
Power Requirements
Volts
AC 120V / 60Hz
Battery Backup
4+ AA Battery 6V
Lamps
LED 5V RGB
IR Remote Controller
Customizable WiFi App
Proflame II System
5 levels of Flame Intensity
Remote Controlled Ignition
Vent Free or Ventless Configuration
Oxygen Depletion Sensor
Max. Heat
32,000 BTU/hr (9.38 kW)
Low Heat (NG)
20,000 BTU/hr (5.86 kW)
Low Heat (LP)
16,000 BTU/hr (4.68 kW)
- Downloads
- Videos
Bedrock Ventless
Operated with an SIT Proflame II control system including convenient flame modulation on a sleek hand held remote. The Ventless Bedrock Burner is also the LARGEST ventless Drop-in burner system at 60″ featuring IC controlled LED lighting that operates with a remote or easy to use app. Available in 4 convenient sizes, install indoors or under a covered patio & add 1/2″ reflective glass to finish off.
-
Sizing: 24″ – 60″
-
Install in Masonry Trough or Open Face Wood Burning Fireplaces or Certified Ventless Fireplace
-
Install Indoors or Under Outdoor Covered Patio
-
110v System with Plug or Hard Wire Ready
-
Gas Specific, Non-Field Convertible
-
Duly List for Vented and Ventless Installations
-
5 Flame Height Adjustments
-
Integrated LED Lights w/App Controls
-
Designed with 1/2″ Reflective Fireglass
Models |
VFLDB-36L-EN or VFLDB-36L-EP |
Power Requirements |
|
Volts |
AC 120V / 60Hz |
Battery Backup |
4+ AA Battery 6V |
Lamps |
|
|
LED 5V RGB |
|
IR Remote Controller |
|
Customizable WiFi App |
Proflame II System |
|
|
5 levels of Flame Intensity |
|
Remote Controlled Ignition |
|
Vent Free or Ventless Configuration |
|
Oxygen Depletion Sensor |
Max. Heat |
32,000 BTU/hr (9.38 kW) |
Low Heat (NG) |
20,000 BTU/hr (5.86 kW) |
Low Heat (LP) |
16,000 BTU/hr (4.68 kW) |