-
Description
Loft Burners deliver a contemporary look with an artistic flair – by itself or accessorized to suit the room. Choose decorative tops and firebox liners, in reflective black or brushed stainless steel, and crushed glass in black polished, blue clear, and clear frost.
18, 24 and 30-inch Vent-Free Burners – up to 40,000 Btu
Millivolt models include an on/off switch but will operate with Empire remote controls and thermostats
Intermittent Pilot models include a variable flame height thermostat remote control with 30 percent turndown (for vent-free installation only)
Special 10,000 Btu Millivolt model for bedroom applications (where allowed by code)A vent-free Millivolt Loft Burner may also be installed as a decorative appliance in a vented fireplace to provide ambiance and light – but without the heat. In a vented installation, the burner cannot be operated by thermostat, and the flue damper must be blocked open. A damper clamp is included with all Loft burners. Because IP Loft Burners include a thermostat remote and may not be installed as decorative appliances, a non-thermostat remote is available.
Requires:
• Three DG1 bags of glass to cover both sides of the burner top. Additional glass may be required to cover the floor of a large firebox..
• Use as Vented System requires switch or On/Off RemoteOptions & Accessories
Decorative Media
- Specifications
- Downloads
Loft Burners deliver a contemporary look with an artistic flair – by itself or accessorized to suit the room. Choose decorative tops and firebox liners, in reflective black or brushed stainless steel, and crushed glass in black polished, blue clear, and clear frost.
18, 24 and 30-inch Vent-Free Burners – up to 40,000 Btu
Millivolt models include an on/off switch but will operate with Empire remote controls and thermostats
Intermittent Pilot models include a variable flame height thermostat remote control with 30 percent turndown (for vent-free installation only)
Special 10,000 Btu Millivolt model for bedroom applications (where allowed by code)
A vent-free Millivolt Loft Burner may also be installed as a decorative appliance in a vented fireplace to provide ambiance and light – but without the heat. In a vented installation, the burner cannot be operated by thermostat, and the flue damper must be blocked open. A damper clamp is included with all Loft burners. Because IP Loft Burners include a thermostat remote and may not be installed as decorative appliances, a non-thermostat remote is available.
Requires:
• Three DG1 bags of glass to cover both sides of the burner top. Additional glass may be required to cover the floor of a large firebox..
• Use as Vented System requires switch or On/Off Remote
Options & Accessories
Decorative Media